1202157.us30.myftpupload.com Managed WordPress Site

Category: Heating Repair Service

  • Top Reasons to Choose Professional Heating Repair Service in Sacramento

    Top Reasons to Choose Professional Heating Repair Service in Sacramento

    If you may think – “Why do I need a professional? I can do it on my own.” Well, according to the National Fire Protection Association (NFPA), heating equipment is one of the leading causes of house fires – caused by faulty repairs. 

     

    Don’t fret – these risks and hazards can easily be avoided and reduced with professional help. It’s quite understandable – DIY seems tempting. You may think you can fix small issues on your own – but several risks follow. 

     

    Repairing with improper knowledge can lead to gas leaks, electric failure, equipment failure, etc. These not only put you in danger – but also your neighbor. So, if you have any water heater issues – give a call to your nearest water repair services – and leave the issues to the pros. They also help you with water heater maintenance services – so they’ve got you covered from all sides. 

     

    If you’re still not convinced – and thinking of getting your water heater fixed all by yourself – this blog is for you. We’ve discussed a few major why professional services are the best. 

    5 Reasons You Should Give Water Heater Repair Professional A Call

    Here are 5 top reasons why professional water heater repair service should be hired – 

     

    You’ll Get Warranties On Your Repair

    Many professional water heater services offer warranties on their repairs – this adds assurance to homeowners. These warranties usually cover labor and parts for a specified period – which ensures if the same issue occurs again, it’ll be addressed at no additional cost. 

     

    Reputable repair services use manufactured-approved parts, in case of replacement. These come with their own warranty – which ensures longevity and compatibility. Their repair service warranty usually comes with a warranty of 30 days – depending on the policy of the heating repair company. 

     

    Also, they ensure the repairs and the process are compliant and adhere to the local codes. This is most important if you have a gas or electric water heater – as a small mistake can lead to safety violations. 

     

    Note: The specifics of the warranty may vary – so always consult with the repair company to understand the terms and conditions. 

     

    Appropriate Water Heater Thermostat Setting

    Professional water heater repair services set and calibrate your thermostat so that it performs optimally. This is because a miscalibrated thermostat can cause a heating system to overwork – which leads to higher electric bills. They check wiring connections and ensure compatibility between the thermostat and water heater.

     

    The thermostat must be installed inside the home and away from the sunlight, drafts, or heat sources. Hence, they place the thermostat in an optimal place where it can offer consistent heating without any false readings. This is mostly done during water heater maintenance in Sacramento.

     

    If you have an advanced thermostat – an expert guide you on how you can program the device and reduce heating when you’re not at home. Also, they help you understand the remote-monitored thermostat – which will put you at ease with automation. 

     

    Quick Inspection And Repair

    Professional water heating repair service in Sacramento is a life-saver. They are trained to quickly diagnose the issue and get them fixed in no time. They don’t waste time guessing “what could be wrong?” Instead, they easily pinpoint the issues such as – thermostat issues, leaks, sediment buildup, corrosion, etc. 

     

    They have years of experience and understand how a water heater works. If something seems off, which you might have overlooked – they can identify such issues and fix them right away. This is because most of them come equipped with tools and replacement parts. 

     

    There’s no point in waiting for days when you can have hot water running in no time. If you leave it be – it’ll turn into more complicated issues. Thus costing you more than routine maintenance. So, call a professional and get the water heater fixed. 

     

    Note: An experienced plumbing service can help you with all kinds and sizes of water heaters – tankless, electric, hybrid, gas, etc.

     

    Available For Emergency Services

    A heating system can fail unexpectedly. Hence, professional services in Sacramento are available 24/7 – for any issues that might occur in the middle of the night or at any point of the day. Technicians can reach your home in no time, assess the issue, and fix it immediately. Your nearby water heater services ensure they are available whenever you need them. 

     

    Local heating repair service prioritizes serving their community and promptly addresses situations such as – furnace breakdowns and malfunctioning thermostats. This minimizes daily disruption. Sacramento experiences unpredictable weather shifts, which makes these services reliable.

     

    Also, as they’re available 24/7 – this ensures flexibility for busy households. This caters to the fast-paced lifestyle of Sacramento’s residents and addresses any issues that might occur out of the blue. 

     

    They Follow High Safety Standards

    Every time you work with your water heating appliances – you are dealing with some safety issues. Heating systems pose several risks, such as – scalding, gas leaks and carbon monoxide poisoning, explosion, water leaks, flooding, fire risks, etc. 

     

    Experts are trained on how to identify potential risks and mitigate them – ensuring your appliances are working fine and safely. A professional heating Service in Sacramento conducts inspections to identify the issues, such as – water damage, sediment buildup, gas leaks, faulty pressure relief valves, etc. – which might lead to water heater accidents.

     

    They are also skilled in handling electric wires and gas connections. This means that working on your water heater can reduce shocks, fires, and gas leaks. Also, to prevent water damage and avoid sediment buildup, they advise replacing your old heater parts with new and quality ones and flushing the tank.

     

    Note: A professional water heater service usually flushes the tank when they are in for a maintenance service.

     

    Takeaway

    Calling a water heater repair service includes several benefits. The major reason you should be a pro is – they’ll understand where the problem is occurring without wasting any time. Also, as they’re licensed and bonded – they prioritize your safety. 

     

    With their knowledge and training in HVAC systems – they can resolve your issues in no time. 

     

    Ensure Optimal Water Heater Health With Professional Water Heater Service in Sacramento. Get In Touch With Heald Mechanical For Expert Assistance!

    At Heald Mechanical, we offer convenient repair and maintenance service plans. We are just a call away – which means you never have to worry about your water heater breaking down all of a sudden. With our warranty on every service, you can rest assured we’re at your service again – also, you can save some dollars on the warranty. 

     

    We also offer maintenance services in Sacramento, where we inspect and identify issues that can lead to long-term damage. We also offer AC repair and maintenance, furnace repair, and services, in addition to water heater installation and replacement. 

     

    Contact Heald Mechanical – if you have any questions regarding our water heater repair services in Sacramento.

  • Emergency Heating Repair in Sacramento: What to Do When Your System Fails

    Emergency Heating Repair in Sacramento: What to Do When Your System Fails

    It’s nerve-wracking to see heating systems not working during winter. Sacramento winters are a distinct type of beast. Although it’s not the Arctic, your house may feel more like a walk-in freezer during those unexpectedly cold nights.


    In Sacramento, where there may be unforeseen cold spells during the winter, your heating system becomes your greatest friend. Naturally, that is, until it starts creating problems. When your heating system malfunctions, it can feel more serious than just an annoyance. 


    However, you can do small fixes and minor touch-ups. However, some issues might require a professional heating repair service in Sacramento because there comes a point at which you can’t take any more—before thinking about moving somewhere warmer.


    This winter, stay warm and maintain your heating system with extra care! This blog has discussed a few things you must do when your heating system fails. 


    What Are The Signs Of Heating System Failure?

    1. Sudden Changes In The Room Temperature

    If one room in your home is much colder than others, your heating system may need to be bigger or more manageable. A well-functioning system keeps temperatures consistent, with minimal fluctuations near doors and windows. If sudden drafts or temperature changes occur, it’s time to have your system checked by a professional.


    2. Unusual Sounds


    A properly functioning heating system should be quiet. If you hear squealing, humming, or rattling, it’s time for a check-up. Squealing may indicate loose bearings or motor belt issues, while humming signals a failing blower motor. Rattling often points to loose screws or ductwork. It is better not to ignore unusual noises.


    3. Increase In Dust 


    Poor indoor air quality, especially excess dust, can worsen asthma and allergies. After months of inactivity, heating systems can blow settled dust into your home. While increased dust doesn’t mean repairs are needed, it signals a thorough cleaning to prevent grime buildup and costly damage to HVAC components.


    What Should You Do When Your Heating System Fails?

    Here are some steps you can take if your heating system fails – depending on the issue – 


    When the Heating System Won’t Switch On

    When furnaces don’t turn on immediately after switching the thermostat to “heat,” it can be alarming, but this doesn’t always indicate a major problem. Often, certain minor issues prevent activation. One cause could be the heating system not receiving power, which can be as simple as a tripped breaker or a turned-off power switch. 


    Always check the power switch and circuit breaker first. Another possibility is an ajar access door; many furnaces won’t operate if the blower compartment door is open for safety reasons. Thermostat power issues may also prevent the system from starting. 


    Ensuring the thermostat is turned on, functioning correctly, and not showing any error messages is advisable. If the display is blank, check the batteries or electrical connections. 


    Finally, check that the thermostat settings are correct, with the system set to “HEAT” and the temperature appropriately programmed. Addressing these simple issues could save a costly service call and restore proper furnace function.


    Furnace Doesn’t Ignite

    There could be several reasons why your furnace fails to ignite. A malfunctioning or damaged ignitor may prevent activation and should be tested and replaced by a professional. Incorrectly installed ignitors can also cause system failure due to incompatible voltage.

     

    Carbon buildup on the electronic ignition surface can prevent ignition, leading to repetitive clicking sounds—a technician should clean it. For older furnaces, a pilot light might be out; if it doesn’t stay lit, check for drafts or a faulty thermocouple. 


    Cracked hot surface ignitor elements, which have a lifespan of 3-5 years, can also prevent heating. Additionally, damaged limit switches may shut down the system if the internal temperature becomes too high. Dirty air filters or airflow blockages can cause overheating and premature shutdowns—replace the filter first. 


    If the problem persists, consult an HVAC technician to address the faulty components and restore proper furnace function.


    Cool Air Blows Instead Of Warm Air

    When your system blows cool air instead of heat, you might find several issues. First, check that the gas valve is open – closed valves prevent fuel from reaching the ignition system. Also, ensure your thermostat is set to “AUTO,” not “ON,” to prevent the blower from running unnecessarily. 


    Ignition problems, such as faulty pilot lights or damaged components, may require professional heating repair in Sacramento. Large duct leaks can cause heat loss, so inspect ducts for damage and get a duct leakage analysis if needed. Clogged condensate lines may also hinder the furnace from starting—check and clear blockages. Dirty air filters reduce airflow, so replace filters regularly. 


    Also, ensure the heating system has enough fuel. You can verify fuel levels and check with your provider for any service disruptions. 


    Clogged Air Filter

    There are various ways to stop air filters from clogging too often. To begin with, switch your blower fan from “ON” to “AUTO” to lessen superfluous airflow across the filter. Also, the cleanliness of the air return vents must be maintained since debris and dust can clog the filter by introducing impurities. 


    You can replace filters more frequently if you have significant levels of indoor pollution from –

    • Smoke
    • Pet dander
    • Cooking smells
    • Excessive humidity

    Additionally, look for leaks in the ductwork. Damage or gaps can let outside particles into your system and clog filters. 


    Cover any duct leaks using foil tape or hire a professional duct sealer to keep the air clean. Routine filter replacement ensures proper airflow and effective heating, particularly during periods of heavy system demand in the winter. 


    Burning Smell Coming Out Of Furnace

    If your furnace emits a burning smell after its initial run, it’s essential to promptly identify and address the issue. 


    First, check and replace dirty air filters, which can trap odors and allow contaminants to circulate. Turn off the furnace immediately if the smell resembles burning plastic or electricity. You can also consult a professional to inspect potential wiring problems. 


    Overheating motors can also cause burning odors, often due to airflow restrictions. Ensure vents are clear and check for blockages. If you hear squealing or grinding sounds and a burning smell, turn off the furnace and schedule repairs to avoid further damage.


    Excess Humidity In Your Home

    In Sacramento, winter typically brings drier air. Extra humidity in your home can lead to problems like fogged windows, condensation, and mold growth. This might lead to several HVAC issues. 


    First, if you use a whole-house humidifier to combat dry winter air, ensure it’s functioning properly – a malfunctioning humidifier can release too much moisture. Also, inadequate ventilation can trap humid air indoors. If your HVAC system lacks sufficient ventilation, it may be time to consult a professional to evaluate the airflow in your home.


    Missing or ineffective exhaust fans can prevent moisture and indoor pollutants from escaping. HVAC contractors can install additional exhaust fans, which can help you manage humidity levels effectively. For a professional solution, consider contacting HVAC services in Sacramento. 


    Takeaway

    A heating system failure in Sacramento can be stressful, especially when the weather is cold. The above-mentioned ways can help you find the issues and fix them. However, if you are unable to find the issue or if it is challenging to fix, call a professional.

     

    Attempting to fix the heating system alone can lead to more problems, including safety hazards like electrical issues or gas leaks. Without proper training, you may misdiagnose the problem or overlook critical components. This might result in costly repairs.

     

    Calling a professional heating repair service in Sacramento ensures the issue is handled accurately and promptly. Relying on experts guarantees effective repairs. It also extends the lifespan of your heating system, enhancing your home’s comfort and efficiency.


    Are you looking For Professional HVAC Services in Sacramento? Contact Heald Mechanical!

    If you need professional HVAC services in Sacramento, look no further than Heald Mechanical! 

    Our experienced team offers top-notch heating and cooling solutions depending on your needs. Our services range from routine maintenance to emergency repairs to system installations. We offer quality services with 100% customer satisfaction, ensuring that your home remains comfortable year-round. 

    HVAC issues can disrupt your peace of mind. Don’t delay—contact us today for reliable service. We offer expert heating repair in Sacramento.

  • What to do When the Furnace Fan Stops Working?

    What to do When the Furnace Fan Stops Working?

    As temperatures fluctuate, having a reliable HVAC system is crucial for maintaining a comfortable home environment. A common issue that can disrupt this comfort is a blower fan refusing to start. Whether you’re dealing with a furnace, air conditioner (AC), or heat pump, understanding the potential culprits behind a non-starting blower fan is essential. In this guide, we’ll explore the ten most common reasons for this problem.

    1. Capacitor Issues: 
    • PSC (Permanent Split Capacitor) blower fans require a capacitor for both starting and running the motor. A faulty capacitor can disrupt the artificial phase of electricity needed for the blower motor’s power supply.
    • Testing the capacitor: Use a multimeter to check the MFD (microfarads) reading. If it deviates more than 6% from the rating on the capacitor, it’s likely defective.
    1. Blower Motor Damage:
    • After replacing a bad capacitor, the blower motor may exhibit intermittent operation and a burning smell, indicating damage sustained during the capacitor’s malfunction.
    • Note: Always be prepared to replace the blower motor when dealing with a bad capacitor.
    1. Blower Motor Electrical Windings:
    • If the motor windings have opened up, shorted, or grounded, the motor won’t start. Use a multimeter to check resistance values between wires, ensuring the motor is cool before testing.
    • Tip: A 120v PSC blower motor example illustrates different resistance values for various speed wires.
    1. Blower Motor Bearings: Check for easy turning and the absence of wiggling. Difficulties in spinning or wiggling may indicate a bad bearing.
    2. ECM Blower Motor Module:
    • Electronically Commutated Motors (ECM) may have a faulty module preventing the motor from turning on. Use a multimeter to check for high-voltage power to the motor.
    • Note: Inspect the module visually for any signs of damage or burning.
    1. Bad Control Board:
    • For units with ECM motors, a malfunctioning control board may fail to communicate with the blower motor. Test the motor with a TecMate PRO to eliminate the issue.
    • Tip: Check for loose wiring and ensure the motor receives a 24v signal from the G to C terminals.
    1. Thermostat Face: A drained battery in the thermostat or lack of a common wire can prevent the blower motor from starting. Replace batteries regularly and bypass the thermostat for testing.
    2. Power Off to the Furnace or Air Handler: Ensure the power switch is on, the door switch is engaged, and check for error codes on units with LED displays.
    3. Thermostat Wiring:Damaged thermostat wiring can be the culprit. Check for issues such as animal damage or wire compression during installation. Tip: Bypass the thermostat for testing by jumping from R to G at the control board.
    1. Ductwork Issues: Clogs or collapses in the ductwork can impede airflow, even if the blower motor is operational.

    What is a furnace inducer motor?

    A furnace inducer motor is a component in a gas furnace that helps initiate combustion, removes combustion byproducts, and ensures proper ventilation. It plays a key role in the efficiency and safety of the furnace by creating the necessary airflow for combustion and venting.

    How to replace a furnace blower motor?

    Replacing a furnace blower motor involves turning off the power, disconnecting wires from the old motor, removing the old motor, installing the new motor, connecting wires, testing the new motor, and securing panels. If you’re not experienced, it’s safer to hire a professional for this task.

    How do you know if your blower motor is bad?

    A faulty blower motor in your HVAC system can manifest through various signs. Here are common indicators that your blower motor might be bad:

    1. No Airflow: If you notice little to no airflow coming from your vents, it could indicate a blower motor problem. The motor is responsible for circulating air through the system, and a malfunction can lead to reduced or no airflow.
    2. Weak Airflow: Weak or significantly reduced airflow, even when the system is running, can suggest a struggling blower motor. This might be due to a decrease in the motor’s efficiency.
    3. Unusual Noises: Strange noises, such as squealing, grinding, or rattling, when the HVAC system is running could indicate issues with the blower motor. These sounds may suggest worn-out or damaged components within the motor.
    4. Intermittent Operation: If the blower motor operates inconsistently, turning on and off unexpectedly, it might be a sign of a malfunction. This behavior can lead to uneven heating or cooling in your home.
    5. Overheating Smell: A burnt or overheating smell coming from your vents could indicate a blower motor problem. If the motor is working too hard or experiencing electrical issues, it may produce a noticeable odor.
    6. Motor Won’t Start: If the blower motor fails to start altogether, it’s a clear sign of a problem. This could be due to issues with the motor itself, the capacitor, or other electrical components.
    7. Increased Energy Bills: A malfunctioning blower motor may cause your HVAC system to work harder to maintain the desired temperature. This increased workload can lead to higher energy bills.
    8. Visible Damage: If you can visually inspect the blower motor, look for signs of physical damage, excessive dirt or debris, or signs of overheating, such as discoloration.

    Attempting to repair or replace a blower motor without the necessary expertise can lead to further damage or safety hazards. A professional technician can accurately identify the issue and recommend the appropriate course of action, whether it involves repairing or replacing the blower motor.

    Why my furnace won’t shut off even when the thermostat is off?

    If your furnace continues to run even when the thermostat is set to the “off” position, several potential issues may be causing this problem. Here are some common reasons:

    1. Thermostat Malfunction: The thermostat might be faulty or incorrectly wired. Check if the thermostat is set to the “off” position, and if it is, examine the wiring to ensure proper connections. If the thermostat is still causing issues, it may need to be replaced.
    2. Shorted Wires: Short circuits in the thermostat wires or in the furnace control board can keep the furnace running. Inspect the thermostat wires for any signs of damage, and check the control board for shorts.
    3. Stuck Relay or Contact: The relay or contact switch in the furnace control board may be stuck in the closed position, keeping power flowing to the furnace even when it should be off. This issue often requires professional attention to diagnose and fix.
    4. Faulty Limit Switch: The limit switch is a safety feature that turns off the furnace when the temperature inside the furnace becomes too high. A malfunctioning limit switch may fail to shut off the furnace when needed.
    5. Dirty or Clogged Air Filter: A clogged air filter can cause the furnace to overheat, triggering the limit switch to shut down the burners but not the blower. Ensure that the air filter is clean and replace it if necessary.
    6. Issues with the Thermostat Wiring: Check for loose or improperly connected wires in the thermostat wiring. If there are issues with the wiring, the thermostat may not be effectively communicating with the furnace.
    7. Faulty Thermostat: If the thermostat is not sending the signal to the furnace to shut off, it could be malfunctioning. Consider replacing the thermostat if other troubleshooting steps do not resolve the issue.
    8. High Thermostat Setting: Ensure that the thermostat is not set to an unusually high temperature, causing the furnace to continue running to reach the set temperature.

    Working with heating systems involves dealing with electrical components, and professional expertise is crucial to ensure safety and proper diagnosis of the problem.

    Conclusion

    A blower fan refusing to start can stem from various issues, each requiring a specific approach for resolution. Regular maintenance and timely troubleshooting are crucial for keeping your HVAC system running smoothly. If you encounter difficulties or are unsure about addressing these problems, it’s wise to consult a professional technician.

    At Heald Mechanical, we prioritize your comfort and peace of mind. Our experienced technicians specialize in diagnosing and resolving HVAC issues promptly. Contact Heald Mechanical for reliable services that ensure your HVAC system operates at its best, providing you with comfort year-round.

    Frequently Asked Questions

    What to do when a furnace stops working?

    • Check the thermostat settings and ensure it’s in heating mode.
    • Verify the power supply by checking the circuit breaker.
    • Inspect the air filter for clogs and replace if necessary. If issues persist, seek professional HVAC assistance.

    What to do when your heater is not working?

    • Confirm the thermostat is set to the desired temperature and heating mode.
    • Check the power supply, reset the circuit breaker if needed.
    • Inspect the air filter for blockages and, if the problem persists, contact a heating professional for further diagnosis.

    What happens when the furnace capacitor goes bad?

    • A failing furnace capacitor can result in reduced motor functionality.
    • This may lead to issues with the blower motor starting or running smoothly.
    • Consult an HVAC professional for capacitor replacement and a comprehensive system assessment.

    What to do when your furnace stops working?

    • Check thermostat settings and ensure it’s set to the desired temperature.
    • Verify the power supply by checking the circuit breaker.
    • Inspect the air filter for clogs, and if the problem persists, contact an HVAC professional for expert assistance.

    What to do when the furnace won’t turn on?

    • Ensure the thermostat is set to the heating mode and the desired temperature.
    • Check the circuit breaker for a tripped switch and reset if necessary.
    • If the furnace still won’t turn on, seek assistance from an HVAC professional to diagnose and address the issue.
  • How Often Should You Clean Air Ducts?

    How Often Should You Clean Air Ducts?

    Air ducts are one of the most important parts of a cooling and heating system. If something goes wrong with the air ducts, there will be hindrances to the airflow and energy loss. That is why keeping these air ducts in optimal condition is important, as you would not want to sweat in summer or freeze mid-winter at your home.

    According to experts from the (source) National Air Duct Cleaners Association (NADCA), you should consider getting your air ducts cleaned every 3 to 5 years. In the case of particular cleaning methods, you can wait longer, like 6 to 8 years. But if you notice mold or other stuff in your ducts that might make people sick, it’s a good idea to clean them sooner to keep your home and family healthy.

    Segment of Cities We Serve for HVAC and Plumbing Services

    Is it Necessary to clean your air Ducts?

    According to the (source) Environmental Protection Agency, certain pollutants can be 2 to 5 times more concentrated indoors than outdoors. These pollutants travel throughout your home with the help of air ducts reaching every corner of your home. Given the fact Americans spend 90 percent of their time indoors on average, there is a risk of developing health problems due to these pollutants.

    This why it is important to get your air ducts cleaned with the help of a professional HVAC company. This will help maintain a clean and healthy environment inside your home. But sometimes, you might need to get them cleaned sooner, especially in the situations given below.

    1. Moving into a new residence

    Professional air duct cleaning is important if you are changing homes and recently moved into a new home. This is because you are not aware of what the condition of the air ducts are. The old owner might be a smoker, have a pet, or have had construction done. In either of these cases, a thorough cleaning of the air duct is necessary.

    In case of new constructions, drywall dust and other debris can get disposed of into the home’s air ducts. Also, pet hair gets deposited into the air duct with pets. If you or your family members are allergic to pet hair, it can be very harmful for you to stay in the home without proper cleaning of air ducts along with the rest of the house.

    2. Spotting Mold or musty odors

    Damp and humid places are the greatest attractors for mold. Mold likes to grow in hard-to-reach places like your air ducts. It is difficult to spot early signs of mold, especially if they are far inside your air ducts. This is why periodic inspections and safety checks from professional HVAC cleaners are very necessary. Besides, if you notice mold patches near your vents or other corners of your house, it is time you call a professional HVAC air duct cleaner.

    In case of other symptoms like a musty smell or itchiness and coughing, get a professional cleaner. A professional HVAC service provider will clean the area by killing the mold and stopping it from returning.

    Say Goodbye to Allergens –

    Call Us Now for Duct Cleaning

    3. Unwanted guests(Pests)

    Pests can become your worst nightmare if it gets out of hand. Pests love to cozy up in dark and unreachable places like the air ducts with minimal human intervention. Pests inside the air ducts will contaminate the air inside the house with their mess and odor. This will also decrease the efficiency of your HVAC system, so hiring a professional air duct cleaner is very important. A professional HVAC cleaner will do a thorough cleaning to kick those critters out.

    4. Too Much Dust and Debris

    If it has been years since your HVAC system was first installed, and you have not cleaned it for years, it is time for a deep clean. Besides mold and insects, a lot of stuff can build in your air ducts over time, including dust, hair, dead skin cells, and other allergens. These can reduce the airflow in your air ducts, along with causing health problems.

    Did you know that much of the energy used to heat or cool your home gets wasted? That’s right, according to the experts of NADCA (Source). Dirty air ducts can make your system work harder, shortening its lifespan and hitting your wallet. So, how do you fix this? Hire a professional HVAC cleaner and get your air ducts cleaned. so that your family can get to breathe clean air and you can also save money on your bills.

    5. Feeling Sick or Allergy Symptoms

    If your air ducts are clean, all your daily members experience fresh and clean air. But if our air ducts have not been cleaned for some time now, your air ducts are probably circulating contaminated air throughout the house. This can make allergies and colds worse.

    Furthermore, dust mites love to hang out in dirty ducts, and they can mess with people with respiratory issues. Dirty air ducts can be bad news if your family member already suffers from respiratory problems. In addition, indoor air quality must be kept in check if you have young kids/newborns and older members.

    Explore Our HVAC and Water Heater Services
    Furnace Repair Services Heating Repair Services Water Heater Repair Services
    Water Heater Installation/ Replacement Air Duct Replacement AC Repair and Installation

    Takeaway

    We hope to have cleared your doubts on how often we need to clean air ducts. Besides the given time frame of 3 to 5 years and other obvious reasons, one more situation requires urgent attention to your air ducts. If you notice your family members experiencing sudden health and respiratory issues, it might be linked to dirty air ducts and must not be avoided. All in all, include air duct cleaning as a part of your routine home maintenance.

     

    Read More About

    Reliable HVAC Company in Sacramento for Air Duct Cleaning

    Looking for the Best HVAC company in Sacramento? Heald Mechanical is here to help. Our experienced team provides the best service for all your heating and cooling needs. We are ready to serve you 24/7 for repairs, maintenance, or installation. You can trust Heald Mechanical for reliable HVAC service and peace of mind. Contact us or call us (916-972-7276) today to schedule an appointment!

  • Myths about heating and cooling system you may be believing to be True

    Myths about heating and cooling system you may be believing to be True

    We perform routine maintenance, do the necessary cooling and heating repair in Sacramento, or possibly all those things to make our HVAC unit run as efficiently as possible.

    But, there are some heating and cooling myths that people are accepting to be true, which is preventing them from making the most of HVAC units. In fact, false info can keep you from maintaining your heating and cooling system in the best way.

    With the internet era, people get easily exposed to a pool of information spread all over on the digital platforms and develop some myths. You could even have been using these myths/tricks and applying them without releasing they are all futile.

    Here, we have brought together the most common myths about heating and cooling units that are necessary to be busted :

    • Closing vents will improve energy efficiency and lower your energy bills

    No, it can cause problems that didn’t even exist before. When you close the vent, the air pressure in the ductwork can build up and rise high, leading to leaks in the vent seams. So stop believing closing vents will help cut down your energy bills.

    • Duct tape can be used in sealing the ductwork leaks

    Compared to other sealants, duct taps fail completely in sealing the air ducts’ leaks. Thus, one should never use it to seal air ducts. Instead, you can use water-based mastic duct sealants) as they stick on them quite well and also hold up for long. In addition, it’s best to call HVAC repair and water heater installation Sacramento professionals to seal air ducts if it seems a not-so-doable job.

    • You don’t need to change air filters regularly, only changing them once a year is enough

    Filters need to change when they get dirty because a clogged and dirty filter will restrict airflow, affecting the performance of your unit. It’s vital to change your filters on regular basis. But don’t change it every month if you don’t have pets, dust, indoor pollution. Although, according to recommendations, you are required to change or clean them every 1-3 months. If you don’t, your heating/cooling system will not work efficiently.

    • Maintenance deals are unnecessary expenses

    Once the heating and air conditioning installation in Sacramento has successfully been done, people believe they have nothing to do with it from onwards. Because routine maintenance is deemed as an unnecessary expenditure by most people.

    Reality: Regular maintenance is vital to prevent unexpected repairs, which can become costly if not resolved on time. With routine maintenance, the heating and cooling experts will spot the problem and even potential problem before they all become big and expensive.

    • Getting a bigger AC is better

    Getting a bigger AC system will consume more energy, which means it will cost you more money. It can even cause your home to feel more humid, resulting in mediocre air comfort. It is also very likely to malfunction.

    • An energy-efficient model will save energy and reduce my electricity bills

    Even if you have an energy-efficient heating/cooling unit, it won’t help unless your home is properly insulated or you have no leaks in the windows. It will only work effectively if there is good insulation.