The Benefits of Professional Water Heater Repair Services

Installing a new water heater is a new project for your home. Hence, you need to make changes to your home as well! It is considered an enormous home improvement project. 

You should make some necessary changes since you have used the current water heater for so long. Also, you need to be ready for any surprises that might come along. 

Do you know that Americans use between 300 and 400 gallons of water daily? A significant amount of water is used to heat water for dishwashing and bathing in the colder season. 

Preparing your home before installing a new water heater is essential. Remember to call a professional water heater repair service in Rocklin. They can help you remodel or prepare the space for your new water heater installation project. 

This blog discussed how to prepare your home for a water heater installation. 

Tips to Prepare Your Home For A Water Heater Installation

• Remove The Old Water Heater

Make sure it’s easily accessible if you intend to have your plumbing firm remove your old water heater if it’s still connected. Determine the prime location for your exterior access point based on the water heater. Ensure that getting to and from the water heater is simple.

To remove the tank, ensure that it is emptied. Remember, the tank is not light in weight, even when it is empty. If you have any difficulty removing the tank, your water heater installation service providers can help you. 

It also gives them a clear space to work and install a new water heater. 

• Clear The Area Of Any Dust and Debris

Your old water heater might be eons old, so it accumulates dirt and debris. The area around the water heater also gets dirtier—no matter how much you maintain it—because that’s the least visited area of your home. 

The area needs to be cleaned as thoroughly as possible. To speed up the process, it’s advisable to clear off any dust and dirt beforehand, as these can impede a clean installation.

Remember – dust can cause a fire even though it might not seem like a huge deal – especially when your new water heater tank is insulated. Keeping it away from anything in your HVAC lineup is just the right thing to do.

• Prepare the Installation Area

Many homes install water heaters in basements or on uneven surfaces. Hence, it’s essential to place a sturdy base under the tank. The base should be level and capable of supporting the weight of the full tank. 

A proper base ensures the water heater’s stability and prevents potential issues with the plumbing connections or the tank.

• Verify Electrical Capacity (For Electric Models)

You must ensure your home’s electrical panel has sufficient capacity to handle the increased load from the new unit. Hire professional water heater installation services – they can inspect your panel and determine if it can accommodate the additional power draw. 

If the panel is outdated or lacks the necessary capacity, they may recommend upgrading it to ensure the safe installation of your new water heater. 

• Ensure Gas Line Compatibility (For Gas Models)

If you’re installing a gas water heater, consult an experienced plumber for water heater installation in Rocklin. They will verify if your existing gas line is compatible with the new unit. 

They will gauge the size and condition of the line. This helps to determine if it can provide sufficient gas flow to the heater. 

Sometimes, they might recommend upgrading the gas to at least 3⁄4 inch in diameter. This helps ensure proper operation and safety. Upgrading the gas line may require additional permits and inspections. 

• Check For Ventilation (For Gas and Tankless Models)

If you are installing gas and tankless models, ensure proper ventilation. A sound ventilation system prevents the buildup of dangerous carbon monoxide. 

Gas water heaters require ventilation to the outside. On the other hand, tankless models need corrosion-resistant, gas-tight Category III stainless steel venting material. 

Ensure that the installation location allows for the necessary ventilation components. The venting system must also be properly sized and installed according to the local building codes.

• Make Sure There Are No Disarray

Does a lot of stuff surround your water heater? Keeping possessions in out-of-the-way places in your house is typical, such as the spot next to your water heater.

A professional water heater replacement in Rocklin will start working on your project once all the obstacles are removed. This is because the plumbers will bring in tools and equipment – which might need a clear path. Hence, it is preferable to have more room to work with than just to clear a small route to the location of your water heater.

Since the water main will need to be reached during the installation procedure, it’s also a good idea to ensure no barriers.

Takeaway

Installing a new water heater in your home is exciting. However, ensuring your home is free of any blockage or obstacle is essential. This can minimize any damage to the new water heater and ensure your safety. 

You can clean and remove any accumulated dirt or debris over the years. However, it is advisable not to install a water heater or remove the old one on your own. Hire a professional to handle the installation; their expertise ensures compliance with the local code and also minimizes any risk of accidents. 

Looking for the Best Water Heater Installation? Contact Heald Mechanical Now!

Talking to a professional can make the installation process easy and efficient. Heald Mechanical helps you with water heater replacement and installation in Rocklin, CA. We also offer AC repair services, water heater repair services, AC installation, and many more.

If you need water heater repair service in Rocklin or need to install a new one, we are just a call away. 

Contact us now!